Info about ham - PixelExperience Wiki

Note: This page is auto-generated for the ZUK Z1, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Warning: The ZUK Z1 is no longer maintained. A build guide is available for maintainers that would like to make private builds, or even restart official support.

Get PixelExperience for the ZUK Z1

Get the builds here

Guides

Installation
Build for yourself
Update to a newer build of the same PixelExperience version
Upgrade to a higher Android version (e.g. Android 10 -> Android 11)

Special boot modes

Recovery: With the device powered off, hold Volume Down + Volume Up + Power.
Download: With the device powered off, hold Volume Down + Volume Up and connect the USB cable.

Find help online

You can find assistance with PixelExperience on our Telegram group.

ZUK Z1 (ham)

Released	October 14, 2015
Specifications
SoC	Qualcomm MSM8974AC Snapdragon 801
RAM	3 GB
CPU	Quad-core Krait 400 2.5 GHz
Architecture	arm
GPU	Adreno 330
Network	2G GSM 2G CDMA 3G UMTS 4G LTE
Storage	64 GB
SD card	none
Screen	139.7 mm (5.5 in) 1920x1080 (401 PPI) JDI IPS
Bluetooth	4.1
Wi-Fi	802.11 a/b/g/n/ac, Dual-band, Hotspot
Peripherals	Fingerprint reader GPS Accelerometer Gyroscope Compass Light sensor Proximity sensor
Cameras	2 13 MP F/2.2, Dual LED flash 8 MP, No flash
Dimensions	155.7 mm (6.13 in) (h) 77.3 mm (3.04 in) (w) 8.9 mm (0.35 in) (d)
Battery	Non-removable Li-Po 4100 mAh